#
# IP netfilter configuration
#

menu "IP: Netfilter Configuration"
	depends on INET && NETFILTER

config NF_DEFRAG_IPV4
	tristate
	default n

config NF_CONNTRACK_IPV4
	tristate "IPv4 connection tracking support (required for NAT)"
	depends on NF_CONNTRACK
	default m if NETFILTER_ADVANCED=n
	select NF_DEFRAG_IPV4
	---help---
	  Connection tracking keeps a record of what packets have passed
	  through your machine, in order to figure out how they are related
	  into connections.

	  This is IPv4 support on Layer 3 independent connection tracking.
	  Layer 3 independent connection tracking is experimental scheme
	  which generalize ip_conntrack to support other layer 3 protocols.

	  To compile it as a module, choose M here.  If unsure, say N.

config NF_CONNTRACK_PROC_COMPAT
	bool "proc/sysctl compatibility with old connection tracking"
	depends on NF_CONNTRACK_IPV4
	default y
	help
	  This option enables /proc and sysctl compatibility with the old
	  layer 3 dependant connection tracking. This is needed to keep
	  old programs that have not been adapted to the new names working.

	  If unsure, say Y.

config IP_NF_QUEUE
	tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
	depends on NETFILTER_ADVANCED
	help
	  Netfilter has the ability to queue packets to user space: the
	  netlink device can be used to access them using this driver.

	  This option enables the old IPv4-only "ip_queue" implementation
	  which has been obsoleted by the new "nfnetlink_queue" code (see
	  CONFIG_NETFILTER_NETLINK_QUEUE).

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_IPTABLES
	tristate "IP tables support (required for filtering/masq/NAT)"
	default m if NETFILTER_ADVANCED=n
	select NETFILTER_XTABLES
	help
	  iptables is a general, extensible packet identification framework.
	  The packet filtering and full NAT (masquerading, port forwarding,
	  etc) subsystems now use this: say `Y' or `M' here if you want to use
	  either of those.

	  To compile it as a module, choose M here.  If unsure, say N.

if IP_NF_IPTABLES

# The matches.
config IP_NF_MATCH_ADDRTYPE
	tristate '"addrtype" address type match support'
	depends on NETFILTER_ADVANCED
	help
	  This option allows you to match what routing thinks of an address,
	  eg. UNICAST, LOCAL, BROADCAST, ...

	  If you want to compile it as a module, say M here and read
	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.

config IP_NF_MATCH_AH
	tristate '"ah" match support'
	depends on NETFILTER_ADVANCED
	help
	  This match extension allows you to match a range of SPIs
	  inside AH header of IPSec packets.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_MATCH_ECN
	tristate '"ecn" match support'
	depends on NETFILTER_ADVANCED
	help
	  This option adds a `ECN' match, which allows you to match against
	  the IPv4 and TCP header ECN fields.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_MATCH_TTL
	tristate '"ttl" match support'
	depends on NETFILTER_ADVANCED
	help
	  This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
	  to match packets by their TTL value.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_MATCH_STEALTH
	tristate "stealth match support"
	depends on IP_NF_IPTABLES
	help
	  Enabling this option will drop all syn packets coming to unserved tcp
	  ports as well as all packets coming to unserved udp ports.  If you
	  are using your system to route any type of packets (ie. via NAT)
	  you should put this module at the end of your ruleset, since it will
	  drop packets that aren't going to ports that are listening on your
	  machine itself, it doesn't take into account that the packet might be
	  destined for someone on your internal network if you're using NAT for
	  instance.

	  To compile it as a module, choose M here.  If unsure, say N.

# `filter', generic and specific targets
config IP_NF_FILTER
	tristate "Packet filtering"
	default m if NETFILTER_ADVANCED=n
	help
	  Packet filtering defines a table `filter', which has a series of
	  rules for simple packet filtering at local input, forwarding and
	  local output.  See the man page for iptables(8).

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_REJECT
	tristate "REJECT target support"
	depends on IP_NF_FILTER
	default m if NETFILTER_ADVANCED=n
	help
	  The REJECT target allows a filtering rule to specify that an ICMP
	  error should be issued in response to an incoming packet, rather
	  than silently being dropped.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_LOG
	tristate "LOG target support"
	default m if NETFILTER_ADVANCED=n
	help
	  This option adds a `LOG' target, which allows you to create rules in
	  any iptables table which records the packet header to the syslog.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_ULOG
	tristate "ULOG target support"
	default m if NETFILTER_ADVANCED=n
	---help---

	  This option enables the old IPv4-only "ipt_ULOG" implementation
	  which has been obsoleted by the new "nfnetlink_log" code (see
	  CONFIG_NETFILTER_NETLINK_LOG).

	  This option adds a `ULOG' target, which allows you to create rules in
	  any iptables table. The packet is passed to a userspace logging
	  daemon using netlink multicast sockets; unlike the LOG target
	  which can only be viewed through syslog.

	  The appropriate userspace logging daemon (ulogd) may be obtained from
	  <http://www.gnumonks.org/projects/ulogd/>

	  To compile it as a module, choose M here.  If unsure, say N.

# NAT + specific targets: nf_conntrack
config NF_NAT
	tristate "Full NAT"
	depends on NF_CONNTRACK_IPV4
	default m if NETFILTER_ADVANCED=n
	help
	  The Full NAT option allows masquerading, port forwarding and other
	  forms of full Network Address Port Translation.  It is controlled by
	  the `nat' table in iptables: see the man page for iptables(8).

	  To compile it as a module, choose M here.  If unsure, say N.

config NF_NAT_NEEDED
	bool
	depends on NF_NAT
	default y

config IP_NF_TARGET_MASQUERADE
	tristate "MASQUERADE target support"
	depends on NF_NAT
	default m if NETFILTER_ADVANCED=n
	help
	  Masquerading is a special case of NAT: all outgoing connections are
	  changed to seem to come from a particular interface's address, and
	  if the interface goes down, those connections are lost.  This is
	  only useful for dialup accounts with dynamic IP address (ie. your IP
	  address will be different on next dialup).

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_NETMAP
	tristate "NETMAP target support"
	depends on NF_NAT
	depends on NETFILTER_ADVANCED
	help
	  NETMAP is an implementation of static 1:1 NAT mapping of network
	  addresses. It maps the network address part, while keeping the host
	  address part intact.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_REDIRECT
	tristate "REDIRECT target support"
	depends on NF_NAT
	depends on NETFILTER_ADVANCED
	help
	  REDIRECT is a special case of NAT: all incoming connections are
	  mapped onto the incoming interface's address, causing the packets to
	  come to the local machine instead of passing through.  This is
	  useful for transparent proxies.

	  To compile it as a module, choose M here.  If unsure, say N.

config NF_NAT_SNMP_BASIC
	tristate "Basic SNMP-ALG support"
	depends on NF_NAT
	depends on NETFILTER_ADVANCED
	---help---

	  This module implements an Application Layer Gateway (ALG) for
	  SNMP payloads.  In conjunction with NAT, it allows a network
	  management system to access multiple private networks with
	  conflicting addresses.  It works by modifying IP addresses
	  inside SNMP payloads to match IP-layer NAT mapping.

	  This is the "basic" form of SNMP-ALG, as described in RFC 2962

	  To compile it as a module, choose M here.  If unsure, say N.

# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y),
# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker.
# From kconfig-language.txt:
#
#           <expr> '&&' <expr>                   (6)
#
# (6) Returns the result of min(/expr/, /expr/).
config NF_NAT_PROTO_DCCP
	tristate
	depends on NF_NAT && NF_CT_PROTO_DCCP
	default NF_NAT && NF_CT_PROTO_DCCP

config NF_NAT_PROTO_GRE
	tristate
	depends on NF_NAT && NF_CT_PROTO_GRE

config NF_NAT_PROTO_UDPLITE
	tristate
	depends on NF_NAT && NF_CT_PROTO_UDPLITE
	default NF_NAT && NF_CT_PROTO_UDPLITE

config NF_NAT_PROTO_SCTP
	tristate
	default NF_NAT && NF_CT_PROTO_SCTP
	depends on NF_NAT && NF_CT_PROTO_SCTP
	select LIBCRC32C

config NF_NAT_FTP
	tristate
	depends on NF_CONNTRACK && NF_NAT
	default NF_NAT && NF_CONNTRACK_FTP

config NF_NAT_IRC
	tristate
	depends on NF_CONNTRACK && NF_NAT
	default NF_NAT && NF_CONNTRACK_IRC

config NF_NAT_RTSP
	tristate
 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
 	default NF_NAT && NF_CONNTRACK_RTSP

config NF_NAT_TFTP
	tristate
	depends on NF_CONNTRACK && NF_NAT
	default NF_NAT && NF_CONNTRACK_TFTP

config NF_NAT_AMANDA
	tristate
	depends on NF_CONNTRACK && NF_NAT
	default NF_NAT && NF_CONNTRACK_AMANDA

config NF_NAT_PPTP
	tristate
	depends on NF_CONNTRACK && NF_NAT
	default NF_NAT && NF_CONNTRACK_PPTP
	select NF_NAT_PROTO_GRE

config NF_NAT_H323
	tristate
	depends on NF_CONNTRACK && NF_NAT
	default NF_NAT && NF_CONNTRACK_H323

config NF_NAT_MMS
        tristate
        depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
        default NF_NAT && NF_CONNTRACK_MMS

config NF_NAT_SIP
	tristate
	depends on NF_CONNTRACK && NF_NAT
	default NF_NAT && NF_CONNTRACK_SIP

# mangle + specific targets
config IP_NF_MANGLE
	tristate "Packet mangling"
	default m if NETFILTER_ADVANCED=n
	help
	  This option adds a `mangle' table to iptables: see the man page for
	  iptables(8).  This table is used for various packet alterations
	  which can effect how the packet is routed.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_CLUSTERIP
	tristate "CLUSTERIP target support (EXPERIMENTAL)"
	depends on IP_NF_MANGLE && EXPERIMENTAL
	depends on NF_CONNTRACK_IPV4
	depends on NETFILTER_ADVANCED
	select NF_CONNTRACK_MARK
	help
	  The CLUSTERIP target allows you to build load-balancing clusters of
	  network servers without having a dedicated load-balancing
	  router/server/switch.
	
	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_ECN
	tristate "ECN target support"
	depends on IP_NF_MANGLE
	depends on NETFILTER_ADVANCED
	---help---
	  This option adds a `ECN' target, which can be used in the iptables mangle
	  table.  

	  You can use this target to remove the ECN bits from the IPv4 header of
	  an IP packet.  This is particularly useful, if you need to work around
	  existing ECN blackholes on the internet, but don't want to disable
	  ECN support in general.

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_TARGET_TTL
	tristate  'TTL target support'
	depends on IP_NF_MANGLE
	depends on NETFILTER_ADVANCED
	help
	  This option adds a `TTL' target, which enables the user to modify
	  the TTL value of the IP header.

	  While it is safe to decrement/lower the TTL, this target also enables
	  functionality to increment and set the TTL value of the IP header to
	  arbitrary values.  This is EXTREMELY DANGEROUS since you can easily
	  create immortal packets that loop forever on the network.

	  To compile it as a module, choose M here.  If unsure, say N.

# raw + specific targets
config IP_NF_RAW
	tristate  'raw table support (required for NOTRACK/TRACE)'
	depends on NETFILTER_ADVANCED
	help
	  This option adds a `raw' table to iptables. This table is the very
	  first in the netfilter framework and hooks in at the PREROUTING
	  and OUTPUT chains.
	
	  If you want to compile it as a module, say M here and read
	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.

# security table for MAC policy
config IP_NF_SECURITY
	tristate "Security table"
	depends on SECURITY
	depends on NETFILTER_ADVANCED
	help
	  This option adds a `security' table to iptables, for use
	  with Mandatory Access Control (MAC) policy.
	 
	  If unsure, say N.

endif # IP_NF_IPTABLES

# ARP tables
config IP_NF_ARPTABLES
	tristate "ARP tables support"
	select NETFILTER_XTABLES
	depends on NETFILTER_ADVANCED
	help
	  arptables is a general, extensible packet identification framework.
	  The ARP packet filtering and mangling (manipulation)subsystems
	  use this: say Y or M here if you want to use either of those.

	  To compile it as a module, choose M here.  If unsure, say N.

if IP_NF_ARPTABLES

config IP_NF_ARPFILTER
	tristate "ARP packet filtering"
	help
	  ARP packet filtering defines a table `filter', which has a series of
	  rules for simple ARP packet filtering at local input and
	  local output.  On a bridge, you can also specify filtering rules
	  for forwarded ARP packets. See the man page for arptables(8).

	  To compile it as a module, choose M here.  If unsure, say N.

config IP_NF_ARP_MANGLE
	tristate "ARP payload mangling"
	help
	  Allows altering the ARP packet payload: source and destination
	  hardware and network addresses.

endif # IP_NF_ARPTABLES

config IP_NF_TARGET_IPV4OPTSSTRIP
	tristate  'IPV4OPTSSTRIP target support'
	depends on IP_NF_MANGLE
	help
	  This option adds an IPV4OPTSSTRIP target.
	  This target allows you to strip all IP options in a packet.
	 
	  If you want to compile it as a module, say M here and read
	  Documentation/modules.txt.  If unsure, say `N'.

config IP_NF_MATCH_IPV4OPTIONS
	tristate  'IPV4OPTIONS match support'
	depends on IP_NF_IPTABLES
	help
	  This option adds a IPV4OPTIONS match.
	  It allows you to filter options like source routing,
	  record route, timestamp and router-altert.
	
	  If you say Y here, try iptables -m ipv4options --help for more information.
	 
	  If you want to compile it as a module, say M here and read
	  Documentation/modules.txt.  If unsure, say `N'.

config IP_NF_TARGET_ROUTE
	tristate  'ROUTE target support'
	depends on IP_NF_MANGLE
	help
	  This option adds a `ROUTE' target, which enables you to setup unusual
	  routes. For example, the ROUTE lets you route a received packet through 
	  an interface or towards a host, even if the regular destination of the 
	  packet is the router itself. The ROUTE target is also able to change the 
	  incoming interface of a packet.
	
	  The target can be or not a final target. It has to be used inside the 
	  mangle table.
	  
	  If you want to compile it as a module, say M here and read
	  Documentation/modules.txt.  The module will be called ipt_ROUTE.o.
	  If unsure, say `N'.

config IP_NF_NAT_MMS
	tristate
	depends on IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
	default IP_NF_NAT if IP_NF_MMS=y
	default m if IP_NF_MMS=m

config IP_NF_MMS
	tristate  'MMS protocol support'
	depends on IP_NF_CONNTRACK
	help
	  Tracking MMS (Microsoft Windows Media Services) connections
	  could be problematic if random ports are used to send the
	  streaming content. This option allows users to track streaming
	  connections over random UDP or TCP ports.
	
	  If you want to compile it as a module, say M here and read
	  <file:Documentation/modules.txt>.  If unsure, say `Y'.

config NF_CONNTRACK_RSH
	tristate  'RSH protocol support'
	depends on NF_CONNTRACK
	help
	  The RSH connection tracker is required if the dynamic
	  stderr "Server to Client" connection is to occur during a
	  normal RSH session.  This typically operates as follows;
	
	    Client 0:1023 --> Server 514    (stream 1 - stdin/stdout)
	    Client 0:1023 <-- Server 0:1023 (stream 2 - stderr)
	
	  This connection tracker will identify new RSH sessions,
	  extract the outbound session details, and notify netfilter
	  of pending "related" sessions.
	
	  Warning: This module could be dangerous. It is not "best
	           practice" to use RSH, use SSH in all instances.
	           (see rfc1244, rfc1948, rfc2179, etc ad-nauseum)
	
	
	  If you want to compile it as a module, say M here and read
	  <file:Documentation/modules.txt>.  If unsure, say `N'.

config IP_NF_MATCH_RPC
	tristate  'RPC match support'
	depends on NF_CONNTRACK && IP_NF_IPTABLES
	help
	  This adds CONFIG_IP_NF_MATCH_RPC, which is the RPC connection
	  matcher and tracker.
	
	  This option supplies two connection tracking modules;
	  ip_conntrack_rpc_udp and ip_conntrack_rpc_tcp, which track
	  portmapper requests using UDP and TCP respectively.
	
	  This option also adds an RPC match module for iptables, which
	  matches both via the old "record match" method and a new
	  "procedure match" method. The older method matches all RPC
	  procedure packets that relate to previously recorded packets
	  seen querying a portmapper. The newer method matches only
	  those RPC procedure packets explicitly specified by the user,
	  and that can then be related to previously recorded packets
	  seen querying a portmapper.
	
	  These three modules are required if RPCs are to be filtered
	  accurately; as RPCs are allocated pseudo-randomly to UDP and
	  TCP ports as they register with the portmapper.
	
	  Up to 8 portmapper ports per module, and up to 128 RPC
	  procedures per iptables rule, may be specified by the user,
	  to enable effective RPC management.
	
	
	  If you want to compile it as a module, say M here and read
	  <file:Documentation/modules.txt>.  If unsure, say `N'.

config IP_NF_MATCH_ACCOUNT
	tristate "account match support"
	depends on IP_NF_IPTABLES && PROC_FS
	help
	  This match is used for accounting traffic for all hosts in
	  defined network/netmask. 
	  
	  Features:
	  - long (one counter per protocol TCP/UDP/IMCP/Other) and short statistics
	  - one iptables rule for all hosts in network/netmask
	  - loading/saving counters (by reading/writting to procfs entries)
	  
	  Example usage:
	  
	  account traffic for/to 192.168.0.0/24 network into table mynetwork:
	  
	  # iptables -A FORWARD -m account --aname mynetwork --aaddr 192.168.0.0/24
	  
	  account traffic for/to WWW serwer for 192.168.0.0/24 network into table 
	  mywwwserver:
	  
	  # iptables -A INPUT -p tcp --dport 80 
	    -m account --aname mywwwserver --aaddr 192.168.0.0/24 --ashort
	  # iptables -A OUTPUT -p tcp --sport 80
	    -m account --aname mywwwserver --aaddr 192.168.0.0/24 --ashort    
	  
	  read counters:
	  
	  # cat /proc/net/ipt_account/mynetwork
	  # cat /proc/net/ipt_account/mywwwserver
	  
	  set counters:
	  
	  # echo "ip = 192.168.0.1 packets_src = 0" > /proc/net/ipt_account/mywwserver
	  
	  Webpage: 
	    http://www.barbara.eu.org/~quaker/ipt_account/

config IP_NF_MATCH_ACCOUNT_DEBUG
	bool "account debugging output"
	depends on IP_NF_MATCH_ACCOUNT
	help
	  Say Y to get lots of debugging output.
	  


config IP_NF_TARGET_ACCOUNT
	tristate "ACCOUNT target support"
	depends on IP_NF_IPTABLES
	---help---
	  The ACCOUNT target is a high performance accounting system for local networks.
	  It takes two parameters: --addr network/netmask and --tname NAME.

	  --addr is the subnet which is accounted for
	  --tname is the table name where the information is stored
	
	  The data can be queried later using the libipt_ACCOUNT userspace library
	  or by the "iptaccount" tool which is part of the libipt_ACCOUNT package.
	    
	  A special subnet is "0.0.0.0/0": All data is stored in the src_bytes
	  and src_packets structure of slot "0". This is useful if you want
	  to account the overall traffic to/from your internet provider.

	  For more information go to:
	  http://www.intra2net.com/de/produkte/opensource/ipt_account/
		  
	  To compile it as a module, choose M here.  If unsure, say N.
endmenu

